Cambridge Audio Azur 840E Скачать руководство пользователя страница 14

14

Connections to the 840E Incognito Ready / A-BUS Ready outputs are
made by Cat-5 cable (terminated with an RJ45 jack plug). The RJ45 plug
must be wired to the EIA/TIA 568A wiring standard:

To allow control of your source equipment from the remote rooms an IR
emitter (IR10) is plugged into one of the IR outputs on the rear of the
unit and then attached over the IR window of the source unit.
Alternatively, on our own products that feature IR emitter Inputs, a mini-
jack to mini-jack lead can be used. Commands received by the keypads
can now be sent back to the source equipment via the 840E. 

It is then possible to control the source equipment from the remote
rooms by using the source equipment's own remote controls or through
a learning remote. The Incognito LR10 Learning Remote can fully control
the keypads, “learn” the source's remote control codes (including those
from other manufacturers) and change source input on the 840E etc.

On the front panel display of the 840E  the extra multi-room zones are
indicated by a circle outline next to the input source (see Fig. 1). When
listening to the same source, the circle outline and solid circle overlap
(see Fig. 2).

Fig. 1 - One or both keypads are listening to a different source (Input 2)

to the amplifier (Input 1).

Fig. 2 - One or both keypads are listening to the same source (Input 2)

as the amplifier (Input 2).  

For further details on the Incognito multi-room system please contact
your local Cambridge Audio dealer or visit: 

www.cambridge-audio.com

6 5 4 3 2 1

7

8

Plug view from

contact end

3 4 5 6 7 8

2

1

View into

socket

Gather pairs, trim

and insert into

RJ45 plug

Crimp wires

securely in place

Wire colours:
1. Green/White
2. Green

3. Orange/White
4. Blue
5. Blue/White

6. Orange
7. Brown/White
8. Brown

Mode

Volume

Mode

Volume

The 840E features Incognito Ready/A-
BUS Ready outputs, allowing multi-room
capability. One or two amplified keypads
can be plugged into the 840E (using
Cat5/5e cable and RJ45 plugs) to provide
multi-room audio in one or two secondary
rooms or zones. The keypads are powered by an external PSU (also
required) through the Cat5/5e cables and no mains connection is
required in the secondary rooms.

The 840E is Incognito Ready Type II, which means the keypads can
operate independently of the amplifier in terms of volume/bass/treble
etc, be independently turned on and off, and can also listen to a
different source from that which is currently selected on the amplifier.
However, both keypads can only listen to the same source.

A-BUS is a standard that allows compatibility between different
manufacturers equipment, so A-BUS compatible keypads from other
manufacturers can also be used. If used with our own Incognito KP10
keypads, there are some extra features such as the ability to change
source on the 840E from the keypad (EU model shown here):

Multi-room connections

Order of selection:

1. Input 1

2. Input 2

3. Input 3

4. Input 4

5. Input 5

6. Input 6 (Tape)

IR1

IR2

IR3

IR4

Keypad 1

Keypad 2

Multi-Room

PSU

In

International Patent Pending

LeisureTech Electronics Pty Ltd

GND

Conforms to ANSI/UL STD 60065

7th Edition 2003 Rev 2006/03/20

Certified to CAN/CSA STD C22.2

No. 60065-03

3098092

R

L

R

L

R

L

IR1

IR2

IR3

IR4

Keypad 1

Keypad 2

Multi-Room

IR Emitter

In

Trigger

In

Out/Thru

In

Out

Left

Right

Rec

 Ou

t 2

Sub Out

Rec

 Ou

t 1

Rec

 In

Input 7

Input 6

Input 5

Input 4

Input 3

Input 2

Input 1

Rec Out 2

Rec Out 1

Rec In

Input 7

Input 6

Input 5

Input 4

Input 3

Input 2

Input 1

(Unbalanced)

(Unbalanced)

Pre Out

Pre Out

Left

Right

Balanced Pre Out

Left

Right

RS232C

Control Bus

PSU

In

International Patent Pending

LeisureTech Electronics Pty Ltd

GND

Power AC

On

Off

Power

azur 840E Pre-Amplifier

Power Rating

:

  230V AC ~ 50Hz

Max Power Consumption

:

  36W

Designed in London, England

Flat / 200Hz L.P.

Manufactured
in an ISO9001

approved facility

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; 2) This device must accept any interference, including interference that may cause undesired operation.

Input 2 Balanced Audio

Balanced

Unbalanced

Balanced

Unbalanced

Input 1 Balanced Audio

Input 1

Input 2

GND

CAUTION

Risk of electric

shock.

Do not open.

AVIS

Risque de choc

electrique.

Ne pas ouvrir.

ACHTUNG

Vorm öffnen
des gerätes.

Netzstecker ziehen.

R

L

www.cambridge-audio.com

Standby / On

Stop

Play

Pause

Open
Close

Select

Menu

Skip
Scan

azur

 840C

Upsampling Compact Disc Player

PROGRAM

PS5

LR10

Cat5/5e (up to 30m / 100ft)

IR10

Mini-jack lead

Speakers (e.g. SS10)
connected via
speaker cable

KP10-EU keypad

840C

840E

AS10

Active

Speaker

AS10

Passive

Speaker

Содержание Azur 840E

















Отзывы: