6
6
Front panel controls
Standby/On
Switches the unit between Standby mode (indicated by dim power LED) and
On (indicated by bright power LED). Standby is a low power mode. The unit
may be left in Standby mode when not in use.
Phones
Allows for the connection of stereo headphones with a 6.35mm/¼" Jack
plug. Headphones with an impedance of between 32 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the main and pre-amp
outputs and select a 2-channel stereo down-mix to be created for headphone
use.
/-
Used to tune FM frequencies and skip presets in Tuner mode.
Mode/Store
Press to cycle between Tuner modes and for storing presets (refer to the
‘Operating Instructions’ of this manual for more information).
Tuner FM/AM
Press to select the tuner for output through the 650R. Once in Tuner mode
also use this button to switch between FM and AM modes.
Display
Displays the status of the unit. The IR receiver is also mounted behind this
window. A clear unobstructed line of sight between the remote control and
the sensor is required.
BD/DVD
Press to select the source equipment connected to the BD/DVD input.
Video 1
Press to select the source equipment connected to the Video 1 input.
Video 2
Press to select the source equipment connected to the Video 2 input.
Recorder 1
Press to select the recording device connected to the Recorder 1 input.
Aux
Press to select the source equipment connected to the Aux input.
CD
Press to select the source equipment connected to the CD input.
Recorder 2
Press to select the recording device connected to the Recorder 2 input.
7.1 Direct
Press to select a 7.1, 6.1 or 5.1 source (DVD-A or SACD player etc) connected
to the 7.1 Direct In sockets.
Note: The 650R remembers the audio and video input type and processing
mode for each individual source input. These are recalled each time a source
is selected.
Audio input type
Press this button to select between analogue, digital (optical/coaxial) or HDMI
input types as the source of the audio for the currently selected source input.
The choices available depend on the connections that source support on the
rear panel and whether a HDMI input has been assigned to that source.
Stereo modes
Press to listen to a source in either digitally processed stereo or stereo and
sub modes.
Pro Logic/Neo/DSP surround modes
Press to select between various Pro Logic II/IIx, DTS Neo:6 effects for matrix
encoded analogue or digital material or for post-processing DD/DTS material
(Note: The 650R is unable to auto-detect this kind of source material as it
does not include embedded encoding type flags so manual selection is
required). Also selects various DSP created surround sound modes for
uncoded stereo sources.
Dolby Digital/DTS surround modes
Press to select Dolby Digital or DTS surround modes (with suitably encoded
digital source material). These modes can only be decoded from digital audio
sources (via Coaxial, Optical or HDMI inputs).
Video input type
Press to select the video input type (Composite, S-Video, Component Video or
HDMI) you wish to use as the source of video for the current source input.
Note: The choices available depend on the connections that source supports
on the rear panel and whether a HDMI input has been assigned to that source.
The 650R cannot simultaneously receive HDMI audio and analogue video
from the same source.
For any HDMI audio sources selecting analogue video will then cause the unit
to switch to analogue audio as well. Digital audio via SPDIF/Toslink can then
also be selected via the Audio Input Type button but not HDMI audio. Returning
to HDMI video will allow selection of HDMI audio (or analogue or digital audio)
again. All normal sources with HDMI audio output will have HDMI video output.
Analogue Stereo Direct
Press to listen directly to the analogue inputs for the current source with no
analogue to digital or DSP processing for highest possible stereo sound quality.
Volume
Use to increase/decrease the level of the sound from the outputs of the 650R.
Mute/Display
Press to mute the sound from the main and pre-amp outputs of the 650R.
Press again to cancel mute.
Note: Selecting a new source always cancels mute.
Press and hold to re-display the current decoding mode.
Video 3 source button
Press to select a video camera recorder/video games console connected to
the Video 3 input sockets.
Video 3 input sockets
Connect a video camera recorder/video games console to the 650R.
Audio/Video and digital optical inputs are provided.
Note: The L audio input is also used for the supplied auto setup microphone.
Refer to the ‘Auto setup’ section of this manual for more information.
1
2
3
5
1
2
4
5
15
16
17
18
19
7
8
9
10
11
12
13
20
21
22
4
6
15
16
17
18
19
20
21
22
23
24
3
14
23
24
6
7
8
10
9
11
12
13
14
