Cambium Networks PTP 820S, Руководство по установке

Страница: 70 / 110

Chapter 5: PoE Injector Installation and Connection PoE Injector Wall Mount Installation
phn-3972 004v000
Page 5-4
PoE Injector Wall Mount Installation
List of Items
Table 19 Required items for Wall Mount PoE Injector
Item Description Quantity Remarks
1 PoE Injector 1
Required Tools
•
Metric offset wrench key wrench set
•
Hammer
•
Drilling Machine
Procedure
1
Mount and tighten the PoE Injector to a wall using two M6 bolts and anchors. The M6 bolts
and anchors must be purchased separately.
Note
Use anchor stainless steel with flanged hexagonal nut M6X70.
2 Drill two 6mm diameter holes with 100mm distance between the center of the holes.
3 Insert the anchors with the bolts.
4 Place the washers on the bolt.
5 Tighten the nuts.
Figure 13 PoE Injector Wall Mount Installation