Chapter 6: Configuration and alignment
Using the installation wizard (Master Mode)
Page 6-8
Attribute
Meaning
Radio 1/2 SSID The SSID is used to identify the Master and is used to configure the
Slave with the appropriate Master with which to register. Ensure that
this parameter is configured uniquely for each Master in the network.
Radio 1/2
Channel
Bandiwidth
Configure the channel size used by the radio for RF transmission. This
value may be configured independently for each configured channel on
the Master and Slave.
Radio 1/2
Frequency
Carrier
Configure the frequency carrier for RF transmission. This list is
dynamically adjusted to the regional restrictions based on the setting of
the Country parameter. Ensure that a thorough spectrum analysis has
been completed prior to configuring this parameter.
Installation wizard step 3 – Network parameters
Attribute
Meaning
Network
IP Assignment Static: Device management IP addressing is configured manually in
fields IP Address, Subnet Mask, Gateway, Preferred DNS Server, and
Alternate DNS Server.
DHCP: Device management IP addressing (IP Address, Subnet Mask,
Gateway, Preferred DNS Server and Alternate DNS Server) is assigned
via a network DHCP server, and parameters IP Address, Subnet Mask,
Gateway, Preferred DNS Server, and Alternate DNS Server are not
configurable.
IP Address Internet protocol (IP) address. This address is used by the family of
Internet protocols to uniquely identify this unit on a network.
Note