1. Inventory
PTP 500 Installation Guide
phn-2508_005v000 (Mar 2013)
Page 7
Connectorized ODU additional components
Item
Notes
Antenna
One required per link end (or two per link end for
spatial diversity). Not supplied by Cambium.
Approved antennas are listed in the
PTP 500 and
PTP 300 Series User Guide
.
RF cable
For connecting the ODU to the antenna. May be
cable of type LMR100, LMR200, LMR300, LMR400
or LMR600. LMR400 is supplied by Cambium:
“50 Ohm Braided Coaxial Cable - 75 meter”.
Cambium part number 30010194001.
“50 Ohm Braided Coaxial Cable - 500 meter”.
Cambium part number 30010195001.
N type male connectors
For connecting the RF cables to the ODU. Two
connectors are required per ODU. Use weatherproof
connectors, preferably ones that are supplied with
adhesive lined heat shrink sleeves that are fitted
over the cable/connector interface.
“RF CONNECTOR,N,MALE,STRAIGHT FOR CNT-
400 CABLE”. Cambium part number 09010091001.
Self-amalgamating and PVC tape
To weatherproof the RF connectors.
Cable grounding kits
One kit is required per antenna cable grounding
point.
“Cable Grounding Kits For 1/4" And 3/8" Cable”.
Cambium part number 01010419001.
Lightning arrestor
For protecting the antenna cable at building entry,
when the ODU is mounted indoors. One required per
antenna cable. For example: Polyphaser LSXL-ME or
LSXL.
E1 or T1 additional components
Item
Notes
PTP 300/500 Series E1/T1 Splitter
“PTP 300/500 Series E1/T1 Splitter (per end)”.
Cambium part number WB3476.
E1 or T1 network cable
Purchase separately.
