Cambium Networks PMP 450 AP, Планирование и руководство по установке

Страница: 28 / 287

Chapter 1: Product description Overview of the 450 Platform Family
Page
1-3
• 5 GHz ports - Gigabit copper/power port combined, 100BaseT port with power out and SFP port,
2.5G Copper SFP.
• 3 GHz ports - Gigabit copper Ethernet port without Power, Ethernet, 100/1000BaseT Auxiliary with
power out, SFP1, SFP2.
• 45 bps/Hz spectral efficiency in a single sector and 90 bps/Hz in a back-to-back frequency reuse
deployment.
Table 1 gives a summary of the main PMP 450m Series AP characteristics.
Table 1 Main characteristics of the PMP 450m Series AP
Characteristic Value
Topology PMP
Wireless link condition LOS, near LOS or non-LOS
Range PMP: Up to 40 mi (or 64 km)
Duplexing TDD (symmetric and asymmetric)
Connectivity 1000Base-T Ethernet Main port with PoE input
Operating frequencies 5.150 to 5.925 GHz
3.3 to 3.9 GHz
Tx EIRP 5 GHz - 48 dBm
3 GHz - 52 dBm
Channel bandwidth 5, 7, 10, 15, 20, 30, and 40 MHz
High spectral efficiency 90 bps/Hz
1
Timing synchronization CMM5 or UGPSPTP
Data rate Up to 900 Mbps with 20 MHz channel bandwidth and up to 1.4
Gbps in a 40 MHz channel. Additional data rate improvements
are available by using 5 ms frame size.
Frequency bands
The PMP 450m Series AP operates from
• 5150 to 5925 MHz.
• 3300 to 3900 MHz
Hardware components
The ODU (Outdoor unit) is a self-contained transceiver unit that houses both radio and networking
electronics.
The PMP 450m Series is supplied in the following configurations:
1
This is achieved in an ABAB frequency reuse AP deployment model.