Cambium Networks PMP 450 AP, Руководство по настройке

Страница: 541 / 649

Chapter 4: Reference information Equipment specifications
Page
4-49
Specifications for PTP 450 Series - BH
The PTP 450 BH conforms to the specifications listed in Table 165 .
Table 165 PTP 450 Series - BH specifications
Category Specification
Model Number PTP 450 BH
Spectrum
Channel Spacing 5, 7, 10, 15, 20, 30, and 40 MHz Channel Bandwidth
Configurable on 2.5 MHz increments
Frequency Range 902 to 928 MHz
3300 – 3600 MHz
3500 – 3850 MHz
5470 – 5875 MHz
Channel Bandwidth 900 MHz 5, 7, 10, 15, and 20 MHz
3.5 GHz, 3.6
GHz, and 5
GHz 5, 7, 10, 15, 20, 30 , and 40 MHz
7 MHz Channel bandwidth configurable for 3.5 GHz and
3.65 GHz band only.
OFDM Subcarriers 512 FFT
Interface
MAC (Media Access
Control) Layer Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface
10/100 BaseT, half/full duplex, rate auto negotiated (802.3
compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP, TFTP,
RADIUS
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v2c and v3, TFTP, Syslog
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity