5
cambium networks
CN ePMP OG 09242013
ordering Guide:
1000 Integrated Radio & 1000 Connectorized Radio with Sync
When you are ready to prepare your order, the following equipment components can be selected
for an ePMP network.
ePMP System Components
ePMP Connectorized Radio with Sync
ePMP Integrated Radio
If CONfIGuRED AS AN ACCESS POINT:
Determine the Number of Radios Required based on the
coverage area and the sector configuration (90 degree or 120
degree) selected
If CONfIGuRED AS PTP RADIO:
Determine the Number of Radios Required based on the num-
ber of links needed
If CONfIGuRED AS A SubSCRIbER MODulE:
Determine the Number of SMs required
If CONfIGuRED AS AN ACCESS POINT:
Determine the Number of Radios Required based on the cover-
age area. The integrated antenna has a beam width of approxi-
mately 24 degrees
If CONfIGuRED AS PTP RADIO:
Determine the Number of Radios Required based on the num-
ber of links needed
POWER SuPPlY:
A 30 V Power Supply which allows for Gigabit Ethernet opera-
tion is included with the Radio
Alternatively, the Radio can be powered by the Cambium
CMM3 and CMM4 or a third party 802.3af compliant powering
device
POWER SuPPlY:
A 30 V Power Supply which allows for Fast Ethernet operation
is included with the Radio
Alternatively, the Radio can be powered by any of the PMP100
or PMP4X0 SM Power Supplies
ANTENNA:
4-sector dual polarity (H+V)
3-sector dual polarity (H+V)
Alternative configuration (verify regulations prior to purchase)
ANTENNA:
The ePMP Integrated radio includes a 13 dBi, 24 degree antenna
SuRGE SuPPRESSOR:
The Connectorized, Synchronized radios include built-in surge
suppression – no external suppression is required at the device
SHOulD ADD ExTERNAl uNITS AT:
Cable entrance point leading to Building entrance
On the bottom of the tower/pole near the grounding bar
If the Ethernet connection of the Radio is to be operated in
10/100 Mbps mode, then the 600SSH Surge suppressor can
be utilized. Otherwise a 3rd party gigabit Ethernet compatible
surge suppressor should be used. Such a surge suppressor
(Models # AL-CAT6JW and AL-CAT6HPJW) is available from
L-Com.
SuRGE SuPPRESSOR:
The Integrated radios include built-in surge suppression – no
external suppression is required at the device
SHOulD ADD ExTERNAl uNITS (600SSH) AT:
–Cable entrance point leading to Building entrance
–On the bottom of the tower/pole near the grounding bar (if
deployed on a tower)
CAblING AND ACCESSORIES:
Cat 5e cables
Grounding cables
Connectors
CAblING AND ACCESSORIES:
Cat 5e cables
Grounding cables
Connectors
ExTENDED WARRANTY:
One additional year of coverage
Two additional years of coverage
Four additional years of coverage
ExTENDED WARRANTY:
One additional year of coverage
Two additional years of coverage
Four additional years of coverage
