Cambex Bus Adapter, Инструкция по установке и эксплуатации

Страница: 21 / 37

The autorecover daemon will automatically move operation to
preferred paths. The preferred path is the combination of path
preference values for HBA, device and path. For some arrays,
target device preference is read automatically from the array at
configuration time. Consult the array user manuals for more
information.
Change / Show Characteristics of Cambex Managed HBA’s
Used to display and change HBA preference for one or more
adapters.
Trace Cambex Dynamic Paths
Runs the trace facility, looking only for the entries specific to
the DPF driver and adapter driver.
Manage AutoRecovery Subsystem
Provides the following functions:
Show Status of AutoRecovery Subsystem
Start AutoRecovery Subsystem
Stop AutoRecovery Subsystem
Change / Show AutoRecovery Subsystem Parameters
Parameters are:
-n
Number of successful inquiries (3 - 9)
-t Seconds between inquiries (3 - 3599)
-r Seconds between ODM updates (automatic)
Manage Load-Balancing
Enable or disable dynamic load balancing for the selected disks.
Manage Licensing
Allows the user to enter a new license for the DPF software,
overwriting the existing license, or to display the expiration date
of the current license. To enable a one-time-use, 30-day license
19