CAMAG LINOMAT 5, Инструкция по эксплуатации

Страница: 15 / 29

Linomat 5
Instruction manual, March 2016 Page 14

Press the key combination
RUN-END
(press and hold
RUN
,
then press
END
) and confirm deleting with
ENTER
.

Flow diagrams for these dialogs are depicted in part 7 Display
texts.
4.3 Aborting an application in progress

Press the
END
key
The application in progress is aborted. An aborted application
cannot be continued.
4.4 Resetting the instrument
Procedure:

Press the RESET key
This will abort all activities in progress and re-initialize the in-
strument.
4.5 Docking the syringe
After a method has been started the display will show the re-
quired volume and the vial or ID of the sample to be used.

Draw up the required volume of the sample indicated.

Mount the syringe as described in chapter 3.3

Press ENTER
The syringe drive will now perform an automatic docking at the
indicated volume, then the spraying is started at the waste posi-
tion and finally sample application starts.
If you do not wish to perform automatic docking after mounting
the syringe, you can move the syringe drive manually by means of
the

key. Press both arrow keys to move fast.