cam ZPH Series, Руководство по эксплуатации

Страница: 21 / 40

21/40
7. MAINTENANCE
7.1. Safety instructions for the maintenance of the product
• Make sure you read the operating manual before carrying out maintenance.
• For maintenance, place the fork positioner in its lowest position to the ground. Switch off
the vehicle’s engine and remove the key.
• Use tools and equipment suitable for the task to be performed
• Use Loctite 242 on the screws to remount pieces previously disassembled.
• Do not leave any tools or equipment behind on any part of the machine.
• In the event of injuries caused by escaping oil under pressure, immediately seek medical
assistance.
• After completing any service procedure, always test the fork positioner through five
complete cycles (see chapter ‘5.3.2. Bleed the hydraulic system before use’).
• The operator should wear safety shoes and gloves when using or maintaining the fork
positioner.
• Before maintaining the fork positioner, carefully read the instructions in the manual of your
lifting device.
• This manual contains all the necessary information on the installation and operation of the
PH fork positioner.
• Some of the maintenance operations should only be carried out by professional technicians.
If you require this information and the maintenance steps, please contact your dealer.
• Use Loctite242 on the screws to remount pieces previously disassembled.
• After completing any service procedure, always test the fork positioner through five
complete cycles (See chapter ‘5.3.2. Bleed the hydraulic system before use’).
7.2. Maintenance schedule
Task 8H D W M 6M Y
1. Daily maintenance check
2. Cleaning
3. Check the hydraulic circuit
4. Check the connections of the hydraulic system
5. Check bolts and screws
6. Lubrication
7. Check the wear pads
8H: after the first 8 hours, D: daily, W: weekly, M: monthly, 6M: every 6 months, Y: yearly