cam Panoramic S168, Руководство пользователя

Страница: 21 / 64

20
e
.
e
e
k
e
e
3
e
d
n
e
g
d
s
e
d
3
e
y
n
e
e
e
s
T
,
l
r
e
3
e
d
n
e
s
p
,
can.
7b . Find the Belt clip and remove the
belt.
7c . Pull out the belt from the slots.
7d . Take out the buckle.
7e . Take out the belt lock-off.
Installation of Group 2/3 and it is for
children whose weight between 15-
36kg.
8a . Before the installation, please take
away the harness system of baby car
seat. Do not use any load bearing
supports other than those described in
the instructions and marked in the child
restraint. The belt must be routed as
shown in the manual.
8b . Press the ISOFIT release button and
push the ISOFIT connectors forward as
far as possible.
8c . Push the ISOFIT connectors directly
into the anchorages until you hear an
audible sound “click”.
8d . If the ISOFIT connectors are
correctly installed, the release button
will pop out, and you can see a clear
green mark on it. Grasp the seat body
to check the seat if it is fastened tightly
or shakes. If the seat shakes and the
ISOFIT connectors are pulled out,
please repeat the above steps and
install again.
8e-8f . Place your child into the baby
car seat and let the car belt pass the
belt guide. Fasten the car belt with an
audible sound “click”. Make sure the
lap belt is stretched as low as possible
over the child’s hips, within the belt
guides, and fastened into the buckle.
The shoulder belt must cross midway
between child’s shoulder and neck.
Please make sure that any lap strap is
worn low down, so that the pelvis is
firmly engaged.
Cleaning
Replacement seat covers are available
from your retailer and or at branches.
The cover can be removed and washed
with a mild detergent using the
washing machine’s cycle for delicate
items (30°C). Please observe the
instructions on the washing label of
the cover. The colours of the cover may
fade if washed at more than 30°C. Do
not spin, and never tumble dry in an
electric clothes dryer (the fabric may
separate from the padding). The
plastic parts can be cleaned using
soapy water. Do not use harsh cleaning
agents (such as solvents). The harness
can be removed and washed in
lukewarm soapy water.
Checklist
Check that the harness belt system fits
properly and tightly around your child
and that the shoulder belts are at the
correct height. Check regularly that the
belt in the baby car seat is not
damaged. If it is damaged do not use
your product in any circumstances and
contact your retailer. Check that you
have secured your baby car seat with
the seat belt. If you have any
questions, please contact your
supplier.
Make sure that you have the following
details to hand: serial number
underneath, mark and type of vehicle
and seat on which the baby car seat
used, age and weight of your child.
INSTRUCTIONS FOR USE
SPARE PARTS
1
2
3
4
5
6
7
8
9
Completely soft goods
Set soft protector
Lower carter
Top Tether
5 points belt
Base Isofix assembled
Head adjuster assembled
Seat chell assembled
Side clip
PANORAMIC-marzo 2020_Layout 1 16/03/20 11:48 Pagina 21