21
The fluid head is equipped with multiple tilt and pan step drag controls. The drags help to
eliminate jerks and vibrations when moving the fluid head during filming. The drags can also
be fully disengaged.
1.
Turn the pan and tilt drag to the required index position by aligning the index figure with the
dot mark. Turn the brakes off and engage the drag by slowly panning or tilting the camera.
2.
Turn the drag controls to the 1 position to switch off the drag completely.
Adjusting the Drags
To ensure smooth and reliable operation over the long life of the fluid head, the following
settings should be applied during transportation or periods of storage:
Transportation Head Settings
CAUTION!
Always set the drag to the index positions. Setting the drag between index
positions can cause serious damage to the fluid head.
OFF
Maximum Step
Maximum Step
Pan & Tilt Brake
Counterbalance
3
Pan & Tilt Drags
Installation (11/11)
