2
Family models
The high end model of the NCP is a gateway between different interfaces such as NMEA 0183,
NMEA 2000, BLE (Bluetooth Low Energy) and WIFI. The NCP product range is been
designed to
yield maximum versatility; the NCP range offers several models to serve a number of different
cases:
BLE to NMEA 0183:
It converts your ULTRASONIC Portable wind data into NMEA
0183 sentences. It also acts as a BLE repeater allowing you to connect up to 2
Bluetooth devices to monitor your wind data at the same time.
BLE to NMEA2000:
You can use your ULTRASONIC Portable in an NMEA 2000
network by converting the BLE data received from your portable to NMEA 2000
PGNs (messages). It also acts as a BLE repeater allowing you to connect up to 2
Bluetooth devices to monitor your wind data at the same time.
Wired to NMEA2000 + BLE:
You can use your ULTRASONIC Wired or Ultra Low
Power (ULP485) in an NMEA 2000 network by converting the NMEA0183 wind
sentences into NMEA 2000 PGNs. Additionally it sends the data through Bluetooth
and allows you to connect up to 2 Bluetooth devices at the same time.
High End:
The most versatile model. You can receive wind data from any Ultrasonic
wind meter within Calypso´s range of products
(by the NMEA 0183 interface or by
Bluetooth signal), and converts
the wind data into NMEA 0183 sentences (wired
and Wi‐Fi), NMEA 2000 PGNs and Bluetooth. It can also be used as range‐extender
by using it as a Wi‐Fi Repeater.
This model selects the wind data source as “first come first served” and it translate
it to all output interfaces (NMEA 0183, NMEA 2000, BLE, or WIFI).
All models have a Wi‐Fi Configuration Webserver.
You can check the functionalities of each model in the following table.
BLE to 0183
BLE to N2K
Wired to N2K+BLE
High End
BLE
YES
YES
YES
YES
NMEA 0183
YES
NO
YES
YES
NMEA 2000
NO
YES
YES
YES
WIFI
*
*
*
YES
*All models are available with WIFI option in order to be used as WIFI Range‐extender or as
NMEA 0183 Wi‐Fi server.
