Rejuvenation Series Spas
LTR50001131, Rev. A
W
ater Clarity
www.calspas.com
25
Pure Cure™ Water Sanitizer
The Pure Cure™ water sanitizer is an optional water purification systems installed at the factory. It eradicates
germs in the water that are resistant to chlorine-based chemicals using high intensity UV light.
The water sanitizer works automatically during the spa’s filtration cycle. We recommend increasing filtration
time setting six hours twice a day. See page 11
for setting filtration cycle.
The water sanitizer is virtually maintenance-free. Once a year the UV light needs to be replaced. See
page
31 for instructions.
However, the water sanitizer is not a user-serviceable item and maintenance
must be performed by a spa technician . Have your service technician consult the manufacturer’s
instruction and service manual .
Filter Cleaning
The filter is the part of your spa that removes the debris from the water and needs to be cleaned on a regular
basis to maximize your spa’s filtering performance and heating efficiency.
In addition to spraying off the filter weekly to remove surface debris, your filter should be deep cleaned
periodically to dissolve scale and particles that get lodged deep within the filter fibers and impede the
filtration process. Even if the filter looks clean, scale and particles can clog the fibers and prevent water from
flowing through the filter resulting in the most common spa problem—no heat, caused by a dirty filter.
We recommend you clean your filter once a month and replace it once a year or as necessary.
Remove the filter by turning it counterclockwise, unscrewing the bottom threads, then pulling it up and
1.
out.
Place the dirty filter into a bucket of water deep enough to cover the filter. Add 8 oz of liquid filter cleaner
2.
to the bucket of water.
Note:
It is a good idea to keep a spare filter to use in the spa while the dirty filter is being deep cleaned.
This way, you can rotate the filters and both will last longer.
Soak the filter for a minimum of 24 hours.
3.
Spray the filter with a water hose. Spray each pleat carefully.
4.
Put fresh bromine in the tablet tube (if you use it as a sanitizer) and twist it back on top of the filter.
5.
Reinstall the filter. Do not overtighten.
6.
Ozonator
The ozone generator releases ozone into the spa water. You will still need to test for chlorine or bromine and
occasionally replenish it to return the sanitizer level to the baseline.
Set the spa’s filtration time four hours twice a day (described on
page 11). This activates the ozonator and
produces the ozone gas. Note: Filtration time may need to be increased with heavy bather load.
Содержание Rejuvenation Fountain of Youth
Страница 1: ...LTR50001131 Rev A 1 2 13 ...
