Rejuvenation Series Spas
LTR50001131, Rev. A
Operating
Your Spa
www.calspas.com
12
Locking the Control
The control can be locked to prevent unwanted use or temperature
adjustments.
Press the WARM button, then the LIGHT button five times until LOCK appears on the display. At this point,
1.
you can lock either the panel or the temperature.
Press:
Once
Then
Press:
5X
Press the WARM button, then the LIGHT button four times.
1.
When the display reads FLIP, press the WARM button to invert the display.
2.
Press WARM again to restore the display.
This can also be done by pressing the FLIP button on the control panel.
Flip (Invert Display)
Press:
Once
Then
Press:
4X
To lock the temperature:
Press the WARM button. The display will show
2.
TEMP.
Press the WARM button. The display will show
3.
OFF.
Press the WARM button. The display will show
4.
ON. The temperature will be locked.
Locking the temperature allows Jets and other
features to be used, but the Set Temperature and
other programmed settings cannot be adjusted.
To lock the panel:
Press the WARM button. The display will show
2.
TEMP.
Press the LIGHT button. The display will show
3.
PANL.
Press the WARM button. The control panel will
4.
be locked.
Locking the panel prevents the controller from being
used, but all automatic functions are still active.
Unlocking the control
While pressing and holding the WARM Button, press the LIGHT button twice.
Hold Mode
Hold Mode is used to disable the pumps during service functions like cleaning
or replacing the filter. Hold Mode will last for 1 hour unless the mode is exited
manually.
Press the WARM button. The temperature display will flash.
1.
Press the LIGHT button six times and the display will read HOLD.
2.
Press the WARM button again and the display will flash HOLDING FOR 0:60.
3.
When you are finished, press the LIGHT button to return to normal function.
4.
Press:
Once
Then
Press:
6X
Содержание Rejuvenation Fountain of Youth
Страница 1: ...LTR50001131 Rev A 1 2 13 ...