SECTION 4: SELECT FROM LIST
®
making
since 1986
water work
Note:
The
SELECT/EDIT
key serves the same
purpose as the
ON/RESUME
key in the SELECT
STATION screen.
4B.1 Controller Status:
This screen allows the user to view the following
information:
Controller serial number.
Individual valves ON or PAUSED.
Real time gallon per minute flow rate.
Controller valve amperage draw.
Valve expected flow rate.
Also displays the following situational information:
Master Valve Short
Pump
Short
Mainline
Break.
Rain
Detected.
Freeze
Detected
Stop
Switch.
Pause
Switch
High
Wind
Pause.
Master valve Override w/ remaining time.
Valve ON and reason this controller.
When controller is part of a chain:
Chain
Down.
Valve On elsewhere in the chain & why.
From the SELECT A STATION screen
(Figure 4.0.3).
1.
Press the
SELECT/EDIT
key
once CONTROLLER STATUS has
been chosen.
The CONTROLLER STATUS screen is displayed
(Figure 4.1.1).
14 EXPECTED
14 GPM 0.46 AMPS
ALABASTER COVE
(valves on) (time)
4: 14.9 min
Figure 4.1.1
Note:
Figure 4.1.1 shows ‘All Stations OFF’. This
screen appears when no action is being performed
by the controller of choice.
Note:
When this screen is displayed the handheld
unit will keep in constant communication with the
controller selected. This is accompanied by a
beeping sound from the handheld unit.
2.
Press the
BACK/MENU
key
to return to the SELECT A
STATION screen (Figure 3.0.3).
4B.2 Make Changes:
This section of the handheld unit allows the user to
edit the following individual station valve information:
Total
Minutes
Minutes Per Cycle
Soak In Time
Percent Of ET (if % of ET in use)
Also allows the user to compare individual station
expected flow rates to the actual station flow rate
and edit the following:
Expected
GPM
Square
Footage
Inches per Hour (adjusted automatically)
The SELECT A STATION screen is displayed
(Figure 4.2.1).
SELECT A STATION
Controller Status
Make Changes
1:
2:
3:
Figure 4.2.1
