®
SECTION 4: SELECT FROM LIST
making
since 1986
water work
5.
6.
Press the
RESUME/ON
key
to turn on a selected station
to compare the expected flow
rate to the actual flow rate of
a station.
Note:
When a station is activated to check the
Expected Flow, all other stations on this controller
and the controller chain, if applicable, will be turned
OFF
. Only the selected station will stay
ON
for up to
6.0 minutes. If any other key is pressed on the
handheld all controllers will resume there prior
activities.
Note:
Once all individual station data has been
updated you will be required to send the changes to
the controller.
6.
Press the
BACK/MENU
key
to access the
SEND YOUR
CHANGES
screen.
The SEND YOUR CHANGES screen is displayed
(Figure 4.2.3.2).
Send Your Changes?
YES
Figure 4.2.3.2
Note:
If
YES
was selected all changes will be sent to
the controller at this time. If
NO
was selected all
entries made on the remote will be set back to what
they were before this session.
Note:
The Radio Remote will loop to the
SEND
YOUR CHANGES
screen if any other key is pressed
until a choice is made.
4B.3 Turn Station Valve(s) ON / OFF:
This section of the handheld unit allows the user to
turn individual station valve(s) ON and OFF.
From the SELECT A STATION screen (Figure
4.0.3).
1.
2.
Press the
ON/RESUME
key once
the station number desired has
been chosen.
This will turn the station select ON and display the
CONTROLLER STATUS screen (Figure 4.3.1).
ALABASTER COVE
(valves on) (time)
1: 14.6 min
12 GPM 0.46 AMPS
Figure 4.3.1
3.
Press the
OFF/PAUSE
key two
times (2x) to turn the selected
station valve OFF.
Note:
Pressing the
OFF/PAUSE
key just one time
(1x) will pause the selected station. It will still appear
in the list and is available to be resumed.
Note:
Give the system some time to process your
key inputs communications may take time.
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to scroll
through the menu choices.
Press the
PLUS/AUTO
or
MINUS/AUTO
keys to adjust
the selected entry.
