Calrec OMEGA, Руководство по установке

Страница: 10 / 70

10 Omega
with Bluefin
Temperature Range
Operating: 0 °C to +30 °C (32 °F to +86
°F) in the immediate environment.
Non-operating: -20 °C to +60 °C (-4 °F
to +140 °F).
Relative humidity
Operating: 25% to 80% non condensing.
Non-operating: 0% to 90% non
condensing.
Altitude
Operating: Up to 2,000 metres (6562
feet). (This is the limit to which the safety
tests are valid).
Non-operating: Up to 15,000 metres
(49213 feet).
Earthing
The control surface and processing rack
are provided with chassis earth studs.
These must be connected to a common
earth buss before any AC power is applied
to the system. The system power supplies
and PC are earthed via their AC power
inlets.
AC (Mains) Power
All power supplies are rack-mounting and
are separate from the units they power,
except for the PC which has a built-in
power supply.
AC (Mains) Power inlets are IEC type.
Each PSU in the Bulk PSU rack has one
inlet, each Multi-Rail power supply unit
has one inlet, the PC has one inlet, each
mains powered MADI unit (if purchased)
has one inlet, and there is one inlet on
the rear of the control surface, for any AC
powered equipment which needs to be
housed within it.
envIrOnmental COnsIderatIOns
The whole system must be powered
from the same phase of the AC power
supply. All modules, cards and cables are
designed to permit hot plugging.
Touch Screen
If the console is installed into an outside
broadcast vehicle, it is important that the
touch screen monitor is secured using
suitable fixings during transit to prevent
movement, and possible damage. Calrec
Audio Ltd is not liable for any damages to
the touch screen, the touch screen arm,
the console or any other items caused by
movement or damage of the monitor and /
or monitor arm.
TFT Screens
The TFT meter screens that are fitted
in our consoles are industrial units. The
display manufacturer states that screen
brightness may reduce to 50% of the
initial value after the unit has been running
at maximum brightness for 50,000 hrs.
Our maximum brightness is intentionally
reduced so that the useful life of the back
lights should be in excess of 100,000 hrs.
We do not believe that there are any burn-
in or image-persistence issues with this
type of TFT display.
The TFT screens should be cleaned with
a micro-fiber cloth, dampened only with
clean water. Do not use any corrosive
chemicals, solvents or window cleaning
solutions.
The TFT screens have no user-serviceable
parts. Should you encounter a problem
with any of your screens, please contact
Calrec.