Caloo Ltd
www.caloo.co.uk | [email protected]
INSTALLATION
Model No.: CV-610 Seated Pull down
This fitness unit has been factory aligned and tested before shipment. But it is still highly
recommended that the unit has a thorough checking before mounting.
4.1 SPARE PARTS IN PACKAGE
4.2 UNPACKING AND CHECKING
1. Take off the protective foam films around the product. Do not use sharp objects to cut off
the films in case the unit surface might be scratched.
2. Place the unit on a flat and clean surface.
3. Check for cracks or open areas in the painted coating.
4. Check the dial on the pylon. Turn the dial clockwise or anticlockwise to see if the turning is
smooth.
5. Check the screws and bolts. All the screws and bolts should have been be tightened and
covered with caps unless the screws have a half round head.
6. Check the plastic pipe caps.
7. Check the plastic grips and/or pedals.
8. Contact your dealer and do not mout the unit if a defect is spotted.
Never mount or even operate the unit until all the checking process has finished and no defe-
acts have been found.
4. PRE-MOUNTING
3.1
No. Desc.
Qty
A
pylon foundation bolt
4
3.2
No. Desc.
Qty
A
pylon expansion bolt
4