Pres s“UP/DOWN” to adjust the value.
So finally the call button can be a digital number or a word or the
combination of them, for example, “0010", “8673", “ROOM”,
“HELP”, “BED7”, “10-1”, “A-88”, “86:1” and so on...
If the number selected is empty, the status shows “Not paired”, then
press any button on the wireless calling button (transmitter), the
watch will receive the wireless signal and record it on this number,
the status will turn to “Paired” and jumps to next number
automatically.
Note: Each number can be only paired one call button. If press the
call button which has been paired, it will jump to the paired number.
2) Deleting call buttons
In the pairing status, select the number which want to delete. The
status shows “Paired”, then press the “SET” button, it will delete the
paired call button and turn to “Not paired”.
If want to delete all the paired call buttons, go to “Default set”
setting to restore factory default setting, all the paired call buttons
can be deleted at one time.
Note: The pair & delete setting is operated by administrator only.
2. Working Mode
Each call button has only one ID (i.e. call number), but the call
button may have one or several buttons on it. Each button has its
meaning, like “Order”, “Call”, “Pay”, “Cancel” (restaurant mode) etc.
In different working occasions, the meanings are different.
There are 7 working modes and the corresponding meanings are:
6
