10. Language
The watch receiver supports multiple languages, select and press
“BACK” button to quit.
11. Prompt mode
There are 3 prompt modes when there is calling coming.
1) Vibration
2) Buzzer
3) Vibration & Buzzer
Press “UP/DOWN” button to adjust the value.
12. Default set
In this setting, press “UP/DOWN” button to select restore option,
and then press “BACK” button to standby status, the receiver will
restore to factory default settings. There are 3 options:
1) No – Nothing restored.
2) Part restore – only system settings are restored to factory default
except the pairing information.
3) All restore – all settings will be restored to factory default.
Note: when you move the cursor to the restore option and back to
standby status, the restore operation will take effect, please do this
operation carefully.
VII Other Functions
1) Receiver ON/OFF
When the watch receiver is not in use, the receiver module can be
turned off to avoid receiving the calling message.
Press “POW” button 2s, there is receiver ON/OFF options. Select
and press “SET” button to turn off and back to standby status. On
9
