A. Pool Size / Space Required
It is recommended to allow an additional 18” of space around the perimeter of your portable pool. For example: a 10’ x
18’ rectangle pool should have an area of 13’ x 21’. The larger dimension (13’ x 21’) is referred to as the “foot print”.
B. How do I find level?
It is important that your pool be placed on level ground. Though your pool can tolerate being slightly out of level, it is
best for proper filtration, as well as visual concern, to have your pool as level as possible. Here is a simple way to how
to find level ground:
You will need:
Two small wooden stakes
Length of string, two feet longer than the longest dimension of the pool
One “line level” (can be purchased from any hardware store)
1.
Set one stake into the ground at one end of where the pool will be and the other stake at the other end.
2.
Tie the string stretched between both stakes; make sure it is stretched tight.
3.
Now set the line level in approximately the center of the string.
4.
Tap either stake further into the ground to level the string at both ends.
5.
Now measure the distance from the ground to the string at both ends. If one measurement is 5” at one stake, and
7” at the other stake, then you are only 2” off level.
C. Surface preparation:
If there is grass in the pool area, we recommend removing grass and any foliage prior to assembling of the pool. In
addition to removing grass, it is recommended to add 2 to 3 inches of washed plaster sand or Happy Bottom® pad for
additional protection of the pool liner prior to assembly. (Happy Bottom® can be purchased from your local swimming
pool dealer).
D. Base support:
We always recommend supporting the vertical uprights with concrete or a pressure treated wood base. Failure to use
support base may result in structural failure which is not covered by the warranty.
Preparing the Ground
6
Содержание Cali Fun Pool
Страница 5: ...5 Parts List Specifications...
