Calimar Cali Fun Pool, Руководство пользователя

Страница: 9 / 12

9
Step 9
Now that you’ve completed the pool assembly, it’s time to install the skimmer and return fitting . Follow the diagram
below. Once the skimmer has been properly assembled, insert the two skimmer straps through the openings on the
skimmer and buckle them securely to the loops on the pool liner.
Pool Assembly / Fitting Assembly
Step 8:
Pull foot straps under liner outwards. Insert “U-Tubes” in every foot strap. Two people should lift one short lateral
top rail of the pool while a third person places the top of the “U-Tube” into the corresponding holes in the underside
of the top rail. The pool will remain standing, which will make it easier to fit the rest of the “U-Tubes” into the top rail.
Special note:
Once you finish, make sure the liner fits comfortably on the structure. Go around the pool to check
that the framework is assembled correctly. Make sure each “U-Tube” is correctly inserted into each hole on the top
rail. Go around the perimeter of the pool and tug on the bottom of the “U-Tube” outward. Repeat this process 2-5
times as it will help to set the frame system and level the pool prior to filling with water. Once you start filling the pool
with water, you will not be able to make any changes.
MAKE SURE EACH “U-TUBE” IS FULLY INSERTED INTO TO TOP RAIL PRIOR TO
ADDING WATER.
IMPORTANT:
Make sure to place a support base on concrete or treated wood under each vertical upright as
correctly shown below.