CF-8502_ii_190102
Pg 1
Steampunk Bay
™
CF-8502 & CF-8602
Widespread Lavatory Faucet
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure:
20 to 70 psi
*†
Maximum Flow Rate:
1.2 gpm
*
Operating pressures between hot and cold supplies should vary no more than 30 psi.
†
If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (PRV).
INSTALLING SPOUT TO SINK/DECK
Tighten spout BASE
(4)
and DECORATIVE NUT
(2)
onto spout RISER
(3)
, and slide onto spout
SHANK
(1a)
Insert spout SHANK
(1a)
though sink/deck hole
NOTE:
Sink/Deck recommended hole size shall be
Ø
1-3/8”
From underside, place SLOTTED WASHER
(5)
onto spout SHANK
(1a)
and tighten SPOUT
(1)
into place with NUT
(6)
Insert RUBBER WASHER
(7)
into TEE
(8)
and
attach to spout SHANK
(1a)
IMPORTANT:
TEE
(8)
should be tightened to create watertight
seal and positioned to allow ease of attachment of valve hoses
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
Ø1 3/8
1
1a
3
4
2
1a
5
6
7
8
- ”
