CALIFORNIA ACCENT LIGHTING, INC.
2034 E. Lincoln Ave. #431, Anaheim, CA 92806
ph. 800.921.CALI (2254) or 714.535-7900 \ fx. 714.535.7902
[email protected] \ calilighting.com
© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice.
Installation Instructions
lip
LEDs
™
LLED
8350-UC
4 of 11
Setup & Operation of Controller
CONTROLLER
• DMX Standalone Controller with glass face (128 channels)
• 3 touch-sensitive buttons (on/off/miode, previous, next)
• Up to 24 dynamic or static scenes (8 first visualized by an LED)
• Live intensity and color settings
• Programmable through included USB cable and control software
• Compatible with any DMX fixture or DMX LED driver
• Ready to use (pre-loaded with 8 scenes and 42 RGB fixtures)
• Latest ARM CPU technology
• Customized design for OEM, wall mountable
• One dry contact trigger port on PCB
SPECIFICATIONS
PACKAGE
Controller, CD-ROM, USB cable, connector block
OS REQUIREMENTS
Mac OS X 10.6/10.7/10.8, Windows XP/Vista/7/8 32/64 bit, and USB 2.0
SOFTWARE
Easy Stand Alone, ESA2 (PC & Mac)
VERSIONS
Black or white glass design
CONNECTIONS
Power (2 pins), DMX, (3 pins), Port (2 pins), Micro USB
POWER
5.5V to 12VDC (AC/DC adapter in option). Max 5.5V with USB
CERTIFICATIONS
EC, EMC, ROHS, ETL, UL
KEYPAD
86x76x10mm, 110g
PACKAGE
140x135x50, 365g
USE
Environment IP20. Temperature 0°C to 50°C
AVAILABLE MEMORY
CHANNELS
STEPS
8
1691
16
1011
32
557
48
383
64
291
80
233
96
195
112
166
128
145
6.5” increments up to max run
± 0.125” cutting tolerance
6.5” (165.1mm) increments up to max run
± 0.125” (3.175mm) cutting tolerance
Power Connector
(#LLED8300-PC)
Flexible LED Tape
(#LLED8300)
(Minimum bend radius 1.5”)
Double Stick Tape
(Included)
Surface Mount LEDs
(Included)
2.36”
.39”
3.38”
3.38”
3.38”
3.38”
36”
Previous
Next
On/Off: Short touch turns on and off
Mode: Touch and hold to switch between
color, scene, and dimmer modes
Front
6.5” increments up to max run
± 0.125” cutting tolerance
6.5” (165.1mm) increments up to max run
± 0.125” (3.175mm) cutting tolerance
Power Connector
(#LLED8300-PC)
Flexible LED Tape
(#LLED8300)
(Minimum bend radius 1.5”)
Double Stick Tape
(Included)
Surface Mount LEDs
(Included)
2.36”
.39”
3.38”
3.38”
3.38”
3.38”
36”
Power
DMX
Port
Back
6.5” increments up to max run
± 0.125” cutting tolerance
6.5” (165.1mm) increments up to max run
± 0.125” (3.175mm) cutting tolerance
Power Connector
(#LLED8300-PC)
Flexible LED Tape
(#LLED8300)
(Minimum bend radius 1.5”)
Double Stick Tape
(Included)
Surface Mount LEDs
(Included)
2.36”
.39”
3.38”
3.38”
3.38”
3.38”
36”
Micro USB
Side
1.
Mount an electrical box inside the wall (not included).
NOTE:
THE S.T.I.C.K. controller can be installed in a standard 60mm
electrical black box.
2.
Connect the wires using the green connector block.
DMX:
Connect the DMX cable to the lighting receivers
(for XLR: 1 = ground, 2 = DMX -, and 3 = DMX +)
POWER:
Connect the AC/DC adapter. Do not invert the + and ground.
3.
Mount the interface on a wall.
NOTE:
First, plug in the green connector block. Mount the back side of the interface
to the wall with at least 2 screws. Close the unit by clipping the front panel
onto the back plate. Wait 30 seconds for the touch sensitivity to adjust.
4.
Use TOOLS.EXE to set parameters and ESA2 (PC and Mac) to
make lighting programs.
