20
Specifications
PA916-SP
The PA916-SP is connected to one of two outputs
from the PowerPro PA916 or Powered Companion
Speaker via SP-50 Cable with 1/4” phone plugs.
Connecting to the “Speaker Out” jack will divide
the power between the PowerPro PA916 or
PA916-PS and PA916-SP. Connecting to the
“Switched Out” will disconnect the internal
speakers of the PA916 and deliver all of the power
to the PA916-SP.
NOTE:
There are five (5) LEDs on the front of the
speaker, however they are disconnected because
there is no internal amplifier or wireless
receiver in this passive system.
Acoustic Speaker Compliment
Woofer
10” Diameter, 40 Oz. Magnet, 2” Dia. Voice Coil, 6 Ohm
Tweeter
Compression Horn Driver, 12 Oz. Magnet, 1” Voice Coil, 8 Ohm
Frequency Response
45Hz to 18KHz
Amplifier
90 Watts RMS @ 5% THD (AC)
Sound Pressure Level
94 dB, 1 Watt @ 1 Meter
Power Sources
100-240 volt AC switchmode power supply and 12 volt 7 AH
maintenance-free lead acid batteries (2)
Wireless System
Receiver: Two 16-channel selectable UHF diversity wireless receivers 798-805 MHz.
Antennas are hidden internally.
Microphone Transmitters
Handheld wireless microphone or beltpack transmitters optional. Powered by 2 ea. 1.5 volt AA batteries (included). Beltpack trans-
mitter used with choice of hands-free headset, collar or lapel microphones.
CD Player
Built-in anti-shock mechanism. Fully programmable. Shuffle feature. Plays CD, CD-R/RW.
Tape Cassette
Full logic player and recorder. Automatic program search feature. 4-digit LCD tape counter. Variable speed. Auto reverse.
Transmitter to Powered Companion Speaker
16-Channel selectable UHF transmitter for wireless transmission from PA916 to multiple PA916-SP speakers. 300 ft. range.
Audio Line
Line level XLR jacks (2) providing for attaching PA916-SP speakers via cable. Features volume control for remote speaker(s).
Mixer Panel
Mixer panel accepts two wired microphones via high quality combination connectors for both XLR and 1/4” phone plugs. Voice
music switch adds emphasis in the voice range for longer range projection. Line-In via dual RCA jacks with volume control.
Line-Out via dual RCA jacks. Separate Bass and Treble tone controls. Voice priority switch activates “ducking circuit” which over-
rides music programs when microphone is used. Speaker mute switch mutes the main speaker plus all other speakers connected.
Speaker out. Both switched and unswitched 1/4” phone jacks for connecting speakers.
Dimensions
26 H x 12” W x 10” D
Weight
52 lbs.
Compliance
FCC, CE, C-UL
Telescoping Handle
1/4” Phone Jack Speaker In
Integral Wheels
1
2
3
califone_916SD_manual_rev3.indd 23
6/23/07 4:00:40 PM
