• To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will flash.
Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.
• To select a track to play, press the ‘SKIP FORWARD’ >>
❘
(20) or ‘SKIP BACK’
❘
<< (21) button either
from ‘Stop’ or ‘Pause’. Each press will change the track number by one.
• If the CD is playing, pushing and holding the ‘SKIP’ >>
❘
button will advance through the current
track until it is over, then proceed to advance through the next track as long as the button is held
down. Conversely, pushing and holding the ‘SKIP’
❘
<< button will scan in the reverse direction
through the track currently playing and continue through previous tracks as long as the button is
held down.
• To stop playing the disc, press the ‘STOP’ button (22).
REPEAT PLAYING
• To repeat one track, press the ‘REPEAT’ button (23) one time either while playing or in pause.
• To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.
• A third press of the ‘REPEAT’ button will cancel the repeat command.
MEMORY PROGRAMMING. Up to 16 tracks can be programmed.
With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip
Forward’ >>
❘
or ‘Skip Back’
❘
<< button. Push the ‘PROGRAM’ button again to enter another track to save in
memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time
exits the Program function. Note: When the CD door is opened all programming is cleared.
Random Play Function
Pressing the ‘RANDOM’ button (24) during CD play or stop condition will engage random play. Pressing again
will cancel the function. Note: If the CD has memory programmed, the random function cannot operate until
the program is cleared.
Play Time Mode
Pressing the ‘PLAY TIME’ button (25) changes the time format on the LCD from elapsed time of each track to
the total time remaining on the CD.
Dual Cassette Operation
The 2385AV-02 features a cassette for playback and recording from radio, CD and microphone. Since the
2385AV-02 is a single cassette unit, disregard all references to “Tape B” below. The 2395AV-02 features
dual cassette decks for playback, continuous playback (Deck B to Deck A) and recording from tape, radio,
microphone or CD on Deck A only.
Loading a Tape
To load a cassette tape, press the STOP/EJECT button (34) on Tape A or (35) on Tape B to open the cassette
door. Insert tape with playing side label facing you. Close the cassette door to lock the tape in position. Note:
While Deck A is in playback mode, Deck B must be stopped and not in PLAY or PAUSE mode for Deck A to
playback.
Tape Playback
To play a loaded cassette tape:
1. Set FUNCTION button to TAPE
2. Press PLAY Deck A or B (38) (39)
3. Adjust VOLUME (7) (8)
4. Adjust TREBLE and BASS controls (9) (10) (11) (12)
To Stop Playback
Press the STOP/EJECT key (34) (35).
To Pause Playback
Press the PAUSE key (40) (41) all the way down to lock. To resume play, press the PAUSE key again, and
release.
To Fast Wind/Rewind
Press the REWIND (42) (43) or FAST-FORWARD (44) (45) key. Press the STOP/EJECT key to stop winding at
the desired position.
During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.
OTHER FEATURES AND FUNCTIONS
Headphone Jacks.
Two jacks are provided. One 3.5 mm jack (26) on top and one 1/4” phone jack (27) on
the rear of the cabinet.
8
9
One Track Repeat (Flashing)
4:05 5
Program Input Mode
P
R
:01
— —
Choose Track 4
P
R
:01
04
Program Input Complete
P
R
:02
— —
Track
Track
Repeat
Memory
Track
Memory
Track
Memory
