5. Use the Tuning buttons to select the desired station.
6. Adjust antenna for best reception.
Note:
When tuning FM stereo stations the FM indicator will light when an FM stereo station is tuned in.
Care and Handling of Compact Discs
1.
Handle the disc by its edges or center hole. To keep the disc clean, avoid touching the data surface.
2.
Data is embedded directly beneath the label, protected only by a thin lacquer layer and is more
vulnerable to damage than the bottom. A scratch that penetrates the label will certainly destroy data,
whereas a scratch on the bottom can often be overlooked or corrected by the laser pickup.
3.
Do not write on the label surface. A ballpoint will damage data; marking pens have solvents that may
penetrate the top layer.
4.
Do not stick paper or tape on the label surface; this probably won’t hurt the disc but might jam the
disc drive.
5.
Do not expose a disc to high temperature or humidity for an extended period of time. The disc material
will soften at around 200 degrees Fahrenheit. Allow the disc to reach room temperature before playing if
it has been subjected to extreme cold.
6.
Preventive cleaning is unnecessary and potentially harmful. Clean only when required.
7.
Clean a disc with a soft moistened cloth. Pat dry. Wipe the disc from the center out like spokes of a
wheel. Never wipe across a disc as you would an LP record.
8.
Never use solvents, commercial cleaners or sprays designed for LP’s. Plain lukewarm water is
recommended.
9.
Keep discs protected at all times.
Cassette Maintenance & Service Cleaning
The heads, capstan and pinch roller should be cleaned from time to time to prevent buildup of tape oxide,
which degrades performance.
1.
Remove cassette tape before cleaning.
2.
Clean the head of all visible, reddish-brown oxide with a cotton-tipped swab moistened with a methyl
alcohol or any solution specifically manufactured for this purpose.
Caution:
DO NOT scrape the head surface with hard, sharp or abrasive objects. This will permanently
damage the heads.
3.
Clean the pinch roller by scrubbing the surface of the roller with the moistened swab. Rotate the roller
by hand until the entire surface is clean.
4.
Clean external case surfaces with a moist, soft cloth. Use only a mild detergent water solution.
Head Demagnetization
It is recommended that the tape heads be demagnetized from time to time. This eliminates residual
magnetism which degrades sound reproduction and the recording function.
1.
After cleaning the heads and capstan, place the demagnetizer several feet away from the cassette unit
and plug it into an AC outlet.
2.
Follow the manufacturer’s operating instructions supplied with the demagnetizer.
13
4
33
36
38
42
44
34
40
37
39
43
45
35
41
2
3
18
13
46
HEA DPHONE
R
L
EXT.SPK .
MIC
REMOTE
BEAT CUT
0
1
27
28
29
30
Front View
Rear View
