11
Rotary Knob Menu
Radio Setting
LOC DX:
Select radio local or distant.
LOC: Only stations with strong signal can be
received.
DX: Stations with strong and weak signals can
be received.
Stereo / Mono:
Select FM stereo or mono.
AF: On/Off
Choose AF (Alternative Frequency) on or off.
AF ON: AF function is activated.
AF OFF: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
TA: On/Off
C h o o s e TA ( T r a f f i c A n n o u n c e m e n t s
Identification) on or off.
When TA mode is turned on, the TA indicator
will blink.
When traffic announcement is received, the TA
indicator will display. The unit will temporarily
switch to the tuner mode (regardless of the
current mode) and begin broadcasting the
announcement at TA volume level. After the
traffic announcement is over, it will return to
the previous mode and volume level. When
TA is turned on, SEEK, SCAN, AMS function
can only be received or saved when traffic
program identification (TP) code is received.
CT: On/Off
Some stations broadcast the time and date
within the encoded RDS signal. The clock
time is automatically adjusted when “CT” is
set to “ON”.
TA Volume: 00-33
Choose TA-VOL level.
Regional: On/Off
Choose AF function to implement or ignore the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG ON: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG OFF: AF function will ignore the regional
code (of the PI) and stations in the other
regions can also be tuned automatically.
BT Setting
Bluetooth:
If the Bluetooth is setting is On, then the BT
will be available , otherwise the BT will never
work and in disable status.
Connect:
If the Connect is set to Auto, then BT of
the unit will connect automatically with the
HFP device which is already paired in every
disconnect status ( Bluetooth must be “On”).
Auto Answer:
If the Auto Answer is set to Auto, then
BT of the unit will answer the in-coming
call automatically when the BT is already
connected with your HFP device( Bluetooth
must be “On”), otherwise you have to answer
the in-coming call by press answer button of
the remote or panel.
Pairing Code:
Change the pin code by the remote control.
Default pin code is “1234”.
