EN - 6
General Operation
Power On/Off Button
Press the MUTE/
button to turn the unit on
when the vehicle ignition switch is on. Long
press to turn the unit off.
— — — — — — — — — — — — — — — — — — — —
Adjust Volume level
Rotate the VOL knob to adjust volume
level. Rotate it clockwise to increase and
anticlockwise to decrease the volume.
— — — — — — — — — — — — — — — — — — — —
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB(when
USB connected), SD/MMC card(when card
inserted), AUX play, BT audio, DAB.
— — — — — — — — — — — — — — — — — — — —
Disc Load/Eject
Load: Press to flip down the panel. Insert
the disc into the slot .
Eject: Press to flip down the panel. Press
to eject the disc .
— — — — — — — — — — — — — — — — — — — —
Radio
To fine tune the radio, press |<< or >>| briefly.
To search the station automatically, press |<<
or >>| for more than 2 seconds.
Disc Playback
Track skip: Press |<< or >>| briefly to go to the
next or previous track.
Track seek: Press |<< or >>| for more than 2
seconds to seek the forward or previous track.
— — — — — — — — — — — — — — — — — — — —
AMS : Auto Memory Store
Press AMS briefly to scan the preset station
1-6 for 5 seconds each. Hold for more than
2 seconds, the 6 strongest available station
will be automatically saved in the memory of
preset buttons 1-6.
— — — — — — — — — — — — — — — — — — — —
Auxiliary Input (optional)
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface.
2. Press the SRC button to select Aux-In
mode.
3. Press SRC again to cancel Aux-In mode
and go to the next mode.
— — — — — — — — — — — — — — — — — — — —
Display Selector (DISP)
This unit can display either the clock time or
radio frequency/DAB frequency/CD player
functions. Ordinarily, the radio frequency/
DAB frequency or CD player track indication
is displayed, but the unit will display the time
when the DISP button is pressed. The time
will display for approximately 5 seconds then
return to the radio/CD or DAB player function
display.
Note:
DAB Information(Press Disp Key):
Clock Disp
->
DLS Info
->PTY Disp->Signal
Group Name Disp->Frequency Disp->Bit Rate
Disp->Service Name Disp
— — — — — — — — — — — — — — — — — — — —
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock, perform the following steps:
1. Turn the vehicle ignition and radio on.
2. Press the DISP button to view the clock.
3. With the clock visible on the display, press
and hold the DISP button until the time
display flashes.
4. Within 5 seconds, rotate the VOL knob
counter clockwise to adjust the minutes to
the desired setting. To change the hour,
rotate the VOL knob clockwise to adjust
the hour to the desired time.
5. Press DISP button to confirm and exit
clock setting.
