Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
02
.
Additional information
.................................
04
General
operations
......................................
05
Radio
operations
.........................................
09
CD/SD/MMC/USB Operations
................... ..
11
01
MP3
WMA overview
.............................. . . . . . ..
16
Specification
.................................................
17
Before
playing
discs
................................. . ...
18
Trouble shooting
............................................
19
BLUETOOTH
15
.............................................
..
RDS
operation
.............................................
14
30
0
02
PRECAUTIONS
Cho ose the moun ting location whe re the unit will not interfere with the normal
driving function of the driver.
Bef ore final ly installing the uni t, conne ct the wiring tempor arily and make sure
it is all connected up properly and the unit and the system work properly.
Use onl y the par ts incl uded with the uni t to ens ure proper inst allation. The use
of unauthorized parts can cause malfunctions.
Con sult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop. Like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, form the heater, or where it would be
subject to dust, dirt or excessive vibration. Do not expose this equipment
to rain or moisture.
DIN FRON T-MOU NT (Method A)
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into
the dashboard, select the
appropriate tab according to
the thickness of the dashboard
material and bend them
inwards to secure the holder in
(Fig. 1)
place.
3. Screw
INSTALLATION
(Fig. 1)
1
2
3
19
The Operation Keys
Do Not Work
The Radio or
Automatic Selection
Does Not Work
Defected
The built-in microcomputer is
not operating properly due to
Interference
The antenna cable is not
connected correctly
The signals are too weak
a new one
Press the RESET button or
reinstall the front panel
properly
Connect the antenna cable
correctly
Select the station manually
TROUBLE
SHOOTING
No Power
No Sound
Sound Skipping
The fuse is blown
Inserting the CD in reverse
direction
The CD is extremely dirty or
defected
Temperature inside the car is
too high
Condensation
Volume is at minimum
Wiring is not properly
connected
The installation angle is more
o
than 30
CD is extremely dirty or
Replace a new fuse
Remove the CD from the player
and insert the new one
Insert the CD with the label
facing up
Clean the CD or try to play
a new one
Cool off until the ambient
temperature return to normal
Leave the player off for an
hour or so and try again
Adjust volume to desired level
Check wiring connection
Adjust the installation angle to
o
less than 30
Clean the CD or try to play
A
CD
is
already
inside
the
player
slot
CD
Cannot
Be
Loaded
or
Ejected
The
car
ignition
key
not
been
switched
on
If
the
power
supply
is
properly
connected
to
the
car
accessory
terminal
,
switch
the
ignition
key
to
ACC
Symptom
Causes
Solution
Before
going
through
the
check
list
,
check
wiring
connection
.
If
any
of
the
problems
persist
after
checklist
has
been
made
,
consult
your
nearest
service
dealer
RCD 120BT(/B) • MANUAL
RCD 120BT(/B) • MANUAL
Содержание RCD-120BT/B
Страница 1: ...RCD 120BT B MANUAL GB...
