2
Safety Information
v
Thank you for buying the Roof Mount TFT LCD Monitor . Please read this
manual carefully before using the player in order to get the most out of all
the features and functions. Keep this manual in a safe place, as it can be
a valuable tool in helping you to understand all the features and functions.
v
Do not operate the unit in any way other than described within this manual.
Failure to follow the instructions within the manual will invalidate your
warranty.
v
SAFETY FIRST! Do not install the display where it may (i) obstruct the
driver
’
s vision, (ii) impair the performance of any of the vehicle
’
s operating
systems or safety features, including airbags, or (iii) impair the driver
’
s
ability to safely operate the vehicle.
v
When using the system, make sure you are firmly secured by your seat
belt to ensure you do not accidentally hit your head on the screen during
sudden braking or other incidents. If you are ever in an accident, injuries
can be more severe if the seat belt is not properly buckled.
v
Do not attempt to install or service your display by yourself. Installation or
servicing of the display by persons without training and experience in
electronic equipment and automotive accessories may be dangerous and
could expose you to the risk of electric shock or other hazards.
v
Be careful not to drain the car battery while using the unit with the car
engine stopped. To avoid draining the battery, it is suggested that the
vehicle engine always is running while using the unit.
v
Do not disassemble or alter the unit in any way. Failure to do so can cause
damage to the unit and invalid the warranty.
v
Never clean the surface of the screen with chemical solvent or corrosive
detergent, which may cause permanent damage to the TFT LCD screen.
v
Avoid installing the unit wherever is under direct sunlight or near hot air
vent. Please note that the normal working temperature of the unit is
between -5
℃
to +50
℃
. If the internal temperature of the vehicle is
extremely high, a short cooling down period is necessary before operating
the unit.
v
If the temperature inside the car is very low and the monitor is used soon
after switching on the heater, moisture may form on the panel of the unit.
Turn off the unit immediately! Failure to do so may cause the internal
components to short. Allow the unit to rest for about one hour to allow the
condensation to disappear before continue operation.
v
In extremely cold temperatures, the movement of the picture may be slow
and the picture may be dark. It is not a malfunction. The unit will work
normally once it reaches its operating temperature.
v
Do not drop or hit the LCD panel with a hard object, as it may cause
permanent damage to the LCD panel. Should LCD panel break, avoid
Содержание MCM 1102
Страница 1: ......
