Caliber MCD893, Руководство по эксплуатации

Страница: 8 / 26

EN - 7
Basic Operations
When parking brake applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving ahead, if the
video disc is played, the screen appears
"WARNING!! Engage Parking Brake to
View Video", and blank screen. The above
warning screen will prevent the driver
watching images. The passengers at the
rear seats can watch normally.
When reverse driving
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the original work mode after the reverse
driving is done.
Steering Wheel Control
Source menu -> SETTING menu ->SWC
Setting menu
1. At SWC menu, use < / > button to select a
function, then press and hold a button on
the steering wheel (if your steering wheel
support the function) until the item on the
screen lighted. Now the function is saved in
the button.
2. Repeat step 1 to set functions of other
steering wheel buttons.
3. Exit the setting menu and you can operate
the player by the buttons on the steering
wheel.
4. If you want to change the setting, enter the
SWC setting menu, select a function on
the screen, press and hold a button on the
steering wheel more than 2 seconds, then
the function is saved into the button on
steering wheel. At the same time, all other
steering wheel settings are clear, you must
reset them.
Insert a disc
Press on the panel to slide down the panel.
Insert a disc into the slot, and the unit will
change to disc mode automatically.
Note:
• Please check whether there is a disc in
the unit before you insert another one.
• The unit will exit current playing source and
enter DVD mode when one disc is inserted.
• Some recorded discs, such as CD-R,
CD-RW, DVD-R, DVD+R, DVD-RW,
DVD+RW cannot be played back because
of different recording status. Otherwise,
the discs without being closed could not be
played back.
Eject the disc
Method 1:
Press on the panel to slide down the panel.
Press (EJECT) to eject the disc.
Method 2:
Press on the panel more than 2 seconds
to enter panel menu, and touch EJECT on the
TFT to eject the disc.
Method 3:
Press on the remote control to eject the
disc.
Notes:
• After ejecting the disc, the unit reverts to
SD card mode automatically if you have
inserted one SD card, or the unit reverts to
radio mode.
• You can eject a disc when the unit powered
off. The unit remains off after the disc
ejected.
• If the disc is not removed from the unit
within 10 seconds, the disc will be reloaded
to prevent accidental damage.
Using the touch screen controls
The touch key areas for CD/VCD/DVD
playback are outlined below:
Disc Operation