EN - 15
GPS Antenna Installation Guide
You can mount the GPS antenna in the car or
out of the car.
• Fix the GPS antenna to a suitable position
on the dashboard behind the windscreen,
and ensure no obstacles to receive GPS
signals. When the satellites determine your
position, the navigation system can supply
instruction information. At the time the
satellites do not determine your position
completely, the navigation system can not
supply instruction.
• Place the GPS antenna on the top of the
car outside, no obstacles on the receiving
direction.
Map Card and USB Operation
Other Mode
Using Map Card (SD/MMC Card)
1. To open the panel first, press the
button on the panel. Insert a map card into
the corresponding slot, the unit will load
the map and switch to navigation mode
automatically, then navigating by the touch
screen.
2. To remove the card, you should first select
another source, in order to avoid damaging
the card, then slide down the panel, press
the card slightly, and take off the card after
it popped out.
Note: You can control the panel using
the touch panel control, refer to previous
section: “Panel Control”.
* The panel cannot close if the map card was
not fully inserted or did not remove after
popped it up.
Using USB device
1. Connect your USB device to the USB cable
which you placed in the dashboard or glove
box during installation of the car radio.
When connecting a USB device, the unit
will read the files automatically.
2. To remove the USB device, you should
first select another source, in order to avoid
damaging the USB device.
USB Notes
USB functions (flash memory type) MP3 music play
1. USB flash memory 2 in 1 support
2. Fat 12/fat 16/fat 32 is possible
- Fat 12/16 (dir: 200 support, file: 500 support)
- Fat 32 (dir: 200 support, file: 500 support)
3. File name: 32 byte/dir name: 32 byte /tag name:
32 byte
4. Tag (ID3 tag ver 2.0)
- Title/artist/album: 32 byte support
5. USB 1.1/2.0 support
(It can not support USB 2.0 speed. Just, get the
same speed with USB 1.1)
Not all kinds of USB devices are compatible with
the unit.
AV IN mode
External peripheral devices with RCA audio
and video outputs can be connected with the
unit.
For more details, please refer to < Electrical
Connections>.
NAV mode
Navigation system can be supported by the
MAP card connected with the unit.
For more details, please refer to <Navigation
Operation>.
GPS Antenna,
signal receiving side up
GPS Antenna,
signal receiving side up
GPS Antenna,
signal receiving side up
GPS Antenna,
signal receiving side up
Содержание MCD893
Страница 26: ...CLASS 1 LASER PRODUCT...