28
screen and if there are no POIs near the cursor (i.e. only the address is shown in
the Popup Info window).
•
POI:
opens the list of POIs near the selected point. These are the POIs shown in
the Popup Info window. If you want to add a new POI at the cursor, you can do so
by tapping New in the bottom left corner. This menu point replaces Add POI and it
is only available in the Map screen and if there is at least one POI item near the
Cursor.
3.5.13 Current
street
(No.
15)
This field of the Cockpit screen shows the name or number (as available) of the
current street or road you are driving on.
Tip: Some roads have an alternative name (or number). This is normally shown
together with the primary name in this field. You can hide these alternative names in
Map settings.
3.5.14 Travel
and
Route data (No. 16)
The contents of these three fields are different when cruising (without an active
route) or navigating (following an active route).
While cruising, the fields show the present speed, the current speed limit and the
time of day.
While navigating a route, these fields show the estimated time needed to reach the
destination (ETE), the distance to destination, and the estimated arrival time at the
destination (ETA) by default.
You can choose what to display in these three fields during navigation, by going to
Advanced settings / Display Options. See the following list for your options. The only
restriction is that you cannot select a value that already appears in another field. The
possible field contents are:
•
Distance to destination (default value for the left field)
•
Time to destination (estimated time en route, default value for the middle field)
•
Distance to next via point
•
Time to next via point
•
Time to next maneuver (next route event)
•
Speed
•
Speed
limit
•
Arrival at next via point
•
Arrival at destination (default value for the right field)
