Caliber MCD-163, Инструкция по эксплуатации

Страница: 17 / 19

1. GENERAL
2. CD PLAYER
3. RADIO
FM
Power Supply Requirements
DC 12 Volts, Negative Ground
Chassis Dimensions
178(W)x160(D)x 50(H) mm
Tone Controls
- Bass (at 100 Hz) ±10 dB
- Treble (at 10 KHz) ±10 dB
Maximum Output Power
4x70 watts
Current Drain
15 Ampere (max.)
Signal to Noise Ratio
> 55 dB
Channel Separation
> 40 dB
Frequency Response
40Hz - 18 KHz
Frequency Coverage
87.5 - 108 MHz
IF
10.7 MHz
Sensitivity (S/N=30dB)
4µV
Stereo Separation
>25dB
Specifications
E Preparing New Discs with Rough
Spots
.
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting will
not be performed and the player will not
play the disc. Therefore, remove the rough
edges in advance by using a ballpoint pen
or pencil as shown on the right. To remove
the rough edges, press the side of the pen
or pencil against the inside and outside
edges of the disc.