Calian IntraGrain Bin-Sense, Руководство пользователя

Страница: 13 / 17

www.binsense.com March 2022 Version 1.0 Page 11
OPERATION
CONNECTING TO A MASTER UNIT
Remote units connect wirelessly to a Bin-Sense Master unit using a
radio system similar to Wi-Fi. In order to connect to a Master unit,
the Remote unit must be associated though the Bin-Sense Live
website and must be on the same radio channel. Associations
must be performed by authorized Bin-Sense dealers.
The radio channel is set using the radio channel DIP switches.
Channels 12 through 23 are available with the default channel
being 23. The radio channel only needs to be changed if there are other Bin-Sense Live systems installed nearby
(within roughly 2 km).
To set the radio channel, use a small flat screwdriver to change the individual switches to match the pattern of
the desired channel as shown below. The transparent yellow film covering the switches can be removed with
tweezers or you can push through it with the screwdriver.
More details about connecting to the Master unit can be found in the Bin-Sense Live Startup Manual.
Figure 3: DIP Switches
Figure 4: DIP Switch Settings