CALEFFI SATK Series, Инструкция по эксплуатации

Страница: 13 / 56

5
INST
ALLER
1. Cut off electricity from heat interface
unit.
2. Use a screwdriver and gently press
on the two lower splines to take off
the device from the back of its fixing
template.
3. Insert both ends of the connecting
wire into their proper seat on the
fixing template. Use the proper holes
to install the SATK’S remote control
device directly onto the wall or onto a
housing. The necessary screws are
supplied together with the device.
Pay attention to the sign “UP”.