CALEFFI 524 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 24

USE
12
INSTALLATION INSTRUCTIONS
Please check that all the components are in the box prior to the
installation of this product.
Before installing a 524 series mixer, the system must be inspected to
ensure that it’s operating conditions are within the range of the mixer,
checking, for example, the supply temperature, supply pressures, etc.
System where the 524 series mixer is to be fitted must be flushed to remove
any dirt or debris which may have accumulated during installation.
Failure to remove dirt or debris may affect performance and the
manufacturer’s product guarantee.
The installation of filters of appropriate capacity at the inlet of the water
from the main supply is always advisable.
In areas which are subject to highly aggressive water, arrangements
must be made to treat the water before it enters the valve.
524 series mixers must be installed in accordance with the diagrams in this
manual, taking into account all current applicable standards and code
of practice.
Caleffi 524 series mixers can be installed in any position, either vertical or
horizontal.
The following are shown on the mixer body:
hot water inlet, H and colour red
cold water inlet, C and colour blue
It is essential that access to the valve is totally unobstructed for any
maintenance which may be required to the valve or connections. The
pipework from/to the valve must not be used to support the weigh of the
valve itself.
Thanks to their special features, the 524 series thermostatic mixing valves,
can be installed on centralized systems.