2
Your new Triangle beam only supports a loads up to its rated capacity when
loaded correctly, and withstanding forces based on the unit’s rated capacity.
The Triangle Beam design meets ASME B30.20 BTH-1:
Design Category B and Service Class 2. .
Use the following guidelines in this manual for your protection and for optimal
operation of your equipment. The safety information in this manual is
not all-inclusive. The owner or user is responsible for understanding and
performing according to industry standards and any other required location,
city, state, or federal regulation.
In addition, refer to the Manufacturer’s instruction manuals for more detailed
Product information on other attachments or components used with your
lifting equipment.
Upon receipt, check your unit for loose parts; and, if necessary, reassemble your unit,
making sure all components and fasteners are secure.
Note: Your lifter may appear different from the representations in this manual,
However, the information still applies to your lifter.
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Preface
All qualified persons responsible for installation, operation, maintenance,
and service shall read and understand all the contents of this manual to
avoid serious injury, death, or property damage. Keep this manual.
XXXX
20Tx-xx-x
Xx-xxxxx
See unit ID Tag
2
Model Number description:
Classification (20Tx
S, S
indicates special)
20Tx - xx -
x
Spread, hook center to hook center (feet)
Rated Capacity (TONS)
When contacting The Caldwell Group about
your lifter, identify your lifter by it’s serial number.
Record your Serial Number:
