Calandra Racing Concepts WTF1, Инструкция по сборке

Страница: 6 / 11

5
1854 - Top Deck -
Gen-X10 SE
Bag 6
Top Deck
1424 - 4-40 x 1/4”
Flat Head
1434 - 4-40 x 1/4”
Button Head
3373 - Plastic Battery Position Pieces
1537 - Hex Standoff -
WTF-1 Top Deck
1854
1537
3378
3373
1407
1407 - Anodized Hex Balls (4)
3378 - Body Posts
w/ collars (1 in.)
** Adding the Damper Tubes to the Chassis assembly **
Snap the assembled & lubed damper tubes on the
respective points as shown in the diagram to the right. You
will find it easier to snap on the smaller 2-56 ball studs first,
then pop the lower, larger 4-40 ballcups on.
Bag 5
Damper Tubes
continued...
The 3378 1” Body Post pictured in this assembly is used as an
antenna mounting post. Most all antenna wires will actually
thread through the holes for the body clips and then stay there
on its own. If not, you can also wrap the wire around the outside
of the post similarly to how you would with a rollover antenna on
a 12th scale car. Then hold the wrapped wire in place with any
number of things such as a rubber band, zip-tie, an o-ring, heat
shrink tubing, etc.
Top Deck Orientation - If you were to draw a line
straight across the top deck between the two
mounting holes, then there would be three of the
five countersunk screw holes on one side of the
line, and two on the other. The three holes
should go toward the front of the car.