o
<inbound IP address>:
This is the current IP address in use by the LMU. This value should match the IP address of your LM
Direct™ server.
o
<inbound port>:
This is the current UDP port the LMU will use to deliver its LM Direct™ data. This value should match
UDP port you are using on your LM Direct™ server. It is typically 20500.
o
<Inbound Protocol (LMD/LMX)>:
This is the current UDP/IP messaging protocol in use by the LMU. In general it should be LMD.
Example GSM Response
APP:081 8.3d
COM:0
GPS:No Time Sync
INP:11100111 13.7V
MID:4141000100 ESN
INB:207.7.101.227:20500 LMD
This is a legal agreement between you, the Customer, and CalAmp DataCom Incorporated
(“CalAmp”). By installing and/or using the software or documentation, you are consenting to the terms
of this License. If you do not agree to the terms of this non-exclusive License Agreement, DO NOT
INSTALL OR USE THE SOFTWARE, APIs OR DOCUMENTATION. For a full refund, return the
unused media package and all accompanying materials within seven (7) days to CalAmp.
Where
there is no packaging or media, use of the software and/or documentation constitutes
acceptance.
Definitions:
As used in this License Agreement, “Software” means CalAmp’s LM Direct ™, LMU
Manager™, LapTop Locator™, LMU Application/Programmable Event Generator™, CDMA LMU
Provisioning Tool, GPRS LMU Provisioning Tool, iDEN™ Provisioning Tool, LMU Status, Clone
Config, Hex Dump, LM Exchange™ Traffic Monitor, Freewave Base Station Config, Remote Serial
