COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein.
Page
Reproduction use or disclosure to third parties without express permission is strictly prohibited. ©2020 CalAmp
14
of
35
LMU-1300 Training Guide
Revision & Date
0.8–09/22/2020
Script Section
TAG Definition
Example
!SCR: Script Section starts here. This section must
immediately follow the Configuration Parameter
(!CP) section.
•
PEG Lines are no longer parameterized.
•
!SCR will overwrite the entire PEG2 script
on the device (no longer a union of PEG
lines)
•
You can delete the PEG2 script on the
target device by including the !SCR tag
without any lines following.
•
The generic line number references can
be replaced with custom names or named
sub-routines
!SCR:
L512000;T1,0;A51,512225
L512001;T2,0;A51,512225
L512002;T3,0;C39,7;A51,512185
L512003;T5,2;A51,512185
L512004;T11,0;C17,15;A31,15
L512005;T18,5;C17,15;A31,15
L512006;T48,0;C16,15;^C17,16;A31,16
L512007;T5,2;C8,0;^C16,16;A32,16
L512008;T12,0;A124,28
L512009;T12,0;A125,29
LCustomLabel;T5,2;!C44,0;A51,512195
End of File (EOF) and CRC
TAG Definition
Example
!EOF: End-of-file marker (this tag) must be
included
!CRC: Following EOF marker, a 2-byte binary CRC
value must be appended to validate integrity of
file during transit. This is needed for OTA and
Serial transfers
Important Note: If !SIG or !CRC is incorrect, PULS
will re-calculate upon upload. However, this
means while the file has been corrected for OTA,
your original file will not be valid or usable for
serial updates until fixed.
...
L514014;T18,35;A112,0,0
L514015;T15,0;A112,0,0
L514250;T0,0;A0,0
!EOF:
%P