Cal Spas Cal Heat CU-100, Руководство пользователя

Страница: 47 / 76

Sauna Owner’s Manual
OD-200 Assembly
The assembly of this sauna will require no less than three people. The panels, roof top and roof
assembly are heavy and difficult to lift with by only one person.
The following steps deal with Figures 11 and 12.
1. Assemble the bench. Screw the legs into the underside cross-support of the bench. After
assembling the bench, place the bench on the wooden flooring of the sauna.
2. Place the heater bottom support on the front left corner and the place the heater on top of
the heater support.
3. Place the wall panels against the flooring and attach the panels (with the provided screws)
to the flooring. Attach the center pieces and place between the two front and two back
panels. Then place the corner piece and attach it to the wall panels. Repeat these steps, as
necessary, to complete the wall assembly.
Figure 11. OD-200 assembly
Page 43
Assembling Your Sauna
LTR20071007, Rev. A