16
Installation /
Assemb
ly
Fireplace Owner’s Manual
LTR50001006, Rev. G
www.calflamebbq.com
Fireplace Log Set Placement
The log set, log grate and crushed lava rock are shipped together on
applicable models. Remove the log set and unpack all components.
The logs are fragile -- use care when handling.
Once the fireplace is in position, level and safely hooked up to the
proper fuel supply, install the log grate over the plate burner.
Place the lava rock around the flat burner plate. DO NOT place the lava
rock on the burner plate as it will affect the flow of the flame.
Place the ceramic fire logs on the grate. Start by laying one log in the
center of the grate length wise.
Lay the other logs (quantity may vary by unit type) over the first log
as shown below.
NOTE: Be sure unit is cool before touching any of the compo-
nents .
Place two logs lengthwise in the grate and position remaining logs
over them in an angled position as shown. Ensure the logs are placed
securely to avoid any movement.
18” Log Set
24” Log Set
