Cal Flame BBQ07852P, Руководство пользователя

Страница: 23 / 32

2008 Barbecue Grill and Cart Owner’s Manual Page 21
LTR20081038, Rev. A
Cleaning and Maintenance
Island Cabinets
Be sure to unplug the electrical supply before cleaning
any part of your Cal Flame barbecue. Spray cabinet
area with a soap and water solution. Rinse with a gentle
stream of fresh water.
Griddle
To prevent burns or injury, make sure the griddle is
completely cool before cleaning.
The griddle is made from non-magnetic, 304 grade
stainless steel. There are various stainless steel cleaners
available. Always use the mildest cleaning procedure
first, and always scrub in the direction of the grain.
Soapy water should be sufficient for most cleaning. A
sniff brush may also be helpful in removing grime and
food deposits. Wipe all area dry before storing.
Charcoal Grill
To prevent burns or injury, make sure the grill is completely
cool before cleaning. After initial usage, areas of the grill
may discolor from the grill’s heat.
There are various stainless steel cleaners available.
Always use the mildest cleaning procedure first, and
always scrub in the direction of the grain. Soapy water
should be sufficient for most cleaning.
DO NOT use oven cleaners or abrasive cleaners on
enameled surfaces. They may damage the finish,
causing accelerated wear.
Ash Removal
Remove the ashes as soon as possible after each use.
Wait until the charcoal has cooled, slide out the drip pan
and pour out the ashes. You can save the larger pieces
of charcoal for the next time you cook. Use a garden
hose to wash out accumulated grease and ashes. Allow
the drip pan to dry before reinserting into the grill.
Cooking Grates
Use a solution equal parts detergent and hot water just as
you would for any cooking equipment. A stiff brush may
also be helpful in removing grime and food deposits.
Hood and Body
Wipe the inside hood and body with detergent and hot
water. The external surfaces may be cleaned in the
same fashion. Wipe all area dry before storing.
Storage
For your safety, make sure unit is cool and wood and
charcoal embers completely extinguished before
storing.
Drop-in Food Warmer
To prevent burns or injury, make sure the food warmer is
completely cool before cleaning. The drop in food warmer
is made from non-magnetic, 304 grade stainless steel.
There are various stainless steel cleaners available.
Always use the mildest cleaning procedure first, and
always scrub in the direction of the grain. Soapy water
should be sufficient for most cleaning. All parts of the
food warmer can be cleaned with hot soapy water, rinsed,
dried and buffed with a heavy pile cloth.. Be sure to
rinse thoroughly and to wipe dry to avoid watermarks.
Note: DO NOT use oven cleaners or abrasive cleaners
on enameled surfaces. They may damage the finish,
causing accelerated wear.
30” Food Warmer
Be careful cleaning any part of this appliance, •
particularly the drawer box and back of the drawer
face. All parts of the drawer can be cleaned with hot
soapy water, rinsed, dried and buffed with a heavy
pile cloth. Always try this first, as it is the mildest
cleaning procedure.
Be sure the warming drawer is turned off and the
•
appliance is cooled before using any type of aerosol
cleaner on or around the appliance. The chemical
that produces the spraying action could, in the
presence of heat, ignite or cause metal parts to
corrode.
Use the mildest cleaning procedure first. Some •
brands of cleaners are harsher than others, read
their directions. Try in a small area first.
To avoid marring the surface always rub the metal
•
finishes in the direction of the polish grain lines.
The cleaner will be more effective when used in the
direction of the polished lines.
Use only clean sponges, soft cloths, paper towels,
•
plastic or non-metal soap pads for cleaning or
scouring, as recommended in this section.
Be sure to rinse thoroughly and to wipe dry to avoid
•
watermarks.