CAKEWALK UM-2G, Руководство пользователя

Страница: 11 / 44

11
Getting Connected and Installing Drivers
What is a driver?
A “driver” is software that transfers data between the UM-2G and application software
running on your computer, when your computer and the UM-2G are connected. The driver
sends data from your application to the UM-2G, and from the UM-2G to your application.
Steps to be performed on the UM-2G itself are marked by a symbol.
Do not connect the UM-2G to your computer until you are directed to do so.
1. Start up Windows without the UM-2G connected.
* Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).
2.
Close all currently running software.
3.
Insert the included “UM-2G CD-ROM” into your CD-ROM drive.
4.
In the CD-ROM , go to the appropriate folder as listed below, and double-click the
Setup icon.
UM-2G\Driver\Vista\Setup.exe
* If a message saying “Drivers must be installed by an administrator” appears, log on to
Windows as a user whose account has administrative privileges, and perform the installation
again.
Windows Vista Users
Installing the Driver
The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you use.
• Windows Vista users .................................... p. 11
• Windows XP users ........................................ p. 14
• Macintosh (Mac OS X) users...................... p. 18
* If you want to use Standard driver mode, refer to “Installation of the Standard
Driver” (p. 36).
Operation of the UM-2G
UM-2G_e.book 11 ページ ２００８年１１月１２日 水曜日 午後１０時６分