CAKEWALK UM-2G, Руководство пользователя

Страница: 14 / 44

14
Getting Connected and Installing Drivers
Steps to be performed on the UM-2G itself are marked by a symbol.
Do not connect the UM-2G to your computer until you are directed to do so.
1.
Start up Windows without the UM-2G connected.
* Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used).
2.
Close all currently running software.
3.
Insert the included “UM-2G CD-ROM” into your CD-ROM drive.
4.
In the CD-ROM , go to the appropriate folder as listed below, and double-click the
Setup icon.
UM-2G\Driver\XP\Setup.exe
* If the “Install Program As Other user” dialog box appears, click [Cancel] to terminate the
installation, log on to Windows using an administrator account, and perform the installation
once again.
5.
The screen will indicate “The UM-2G Driver will be installed on your computer.”
Click [Next] .
* If any other message appears, proceed as directed by the message.
Windows XP Users
Installing the Driver
Operation of the UM-2G
UM-2G_e.book 14 ページ ２００８年１１月１２日 水曜日 午後１０時６分