CAKEWALK sonar x3, Справочное руководство

Страница: 396 / 2094

396
Arranging and editing
Comping
See also:
“Recording” on page 267
“Recording modes” on page 278
“Looping” on page 194
“Take lanes” on page 381
Auditioning takes
There are several ways to audition takes in order to compare and find the best takes:
• Click the Take lane’s Solo button .
Unlike track solo buttons, Take lane solo buttons are mutually exclusive, meaning you can only
solo one Take lane on a track at a time. This allows you to quickly audition or solo a single take
since there is no need to first unsolo other takes.When soloed, time mute (partial clip mute)
regions are ignored. You might want to enable looping in order to repeat a specific time region
while you audition different takes.
• Select the desired clip(s) or time region, then press SHIFT+SPACEBAR.
You can use the LEFT/RIGHT/UP/DOWN ARROW keys to audition adjacent takes, then press
the ENTER key to isolate the selected take. This is referred to as
speed comping . For details,
see “Speed comping” on page 404.
• Hold down the J key to enter Scrub mode, then drag across a take.
See:
“Basic comping workflow” on page 393
“Recording takes” on page 394
“Comping methods” on page 397
“Comping with the Smart tool and Comping tool” on page 400
“Speed comping” on page 404
“Adjusting crossfades” on page 407
“Editing Comp clips” on page 408
“Finalizing the comp” on page 411
“Removing all unused takes and empty Take lanes” on page 413
“Comping” on page 391
Tip: If you want to audition takes in context with other tracks, enable Dim Solo mode in the Control
Bar’s Mix module. For details, see “Dim Solo mode” on page 205.